Hauppauge Wintv 7 Serial Number

 admin

Prodinfo.exe is a program you can run which will extract information about the WinTV product you have installed such as model and serial number, MAC address, revision, and features which can be used to identify the exact model of your product. The driver for the device must be installed in order to run Prodinfo.exe. Download HCW Clear. Hauppauge product codes on WinTV internal boards are normally found on the TV tuner. This is a five digit number normally followed by a revision (REV). You need to look at the first two numbers to determine the product type. The other numbers are related to the accessories which are on the product. The installation will Wintv 8 Serial Number a new folder. Called 'WinTV7.exe' - see the dark grey highlighted file below. To configure WinTV-HVR-950 as either an Digital tuner or an Analog tuner. To watch TV full screen, Hauppauge Wintv 7 Problems AQ certified for Windows 7.

  • WinTV v7

Download del pacchetto Driver ed applicazione WinTV v7

WinTV v7 installation package, version 3.9g
For Windows 8, 7, Vista and XP

File name: wintv7_cd_3.9g.exe
File size: 151.4 MB
Date: 02/12/2015

This download is a complete installation package, including drivers for supported WinTV products plus the WinTV v7 application and utilities.

Installation notes:

A valid WinTV application CD-ROM will be needed to install this WinTV v7 version. Any WinTV v6 or WinTV 7 application CD can be used during the install. If you do not have your original WinTV CD-ROM but would like to update to WinTV v7, you can purchase a new CD on the Hauppauge webstore

If you have a WinTV v7.2 CD-ROM with Extend, then the latest version of WinTV Extend will also be installed.

To install the WinTV v7 application update

  • Download the WinTV v7 installation package to your PC. After downloading this file, the file is normally saved in the Download directory on your PC
  • Run Setup.exe from the Download directory on your PC
  • Click Step 1. Install Drivers. This will install the WinTV Windows driver. At the completion of the driver install, you should see a message which says Drivers have been updated sucessfully.
  • Click Step 2. Install WinTV. This will install the WinTV v7 application, 'middleware', TV services and other necessary files.

This will complete the driver and application installation for your WinTV.

Release notes for WinTV v7 version 3.9G:
  • Fixed an error 'You do not have access to make the required system configuration modifications...'
  • Increased Pause Buffer bar size
  • Fixed TitanTV tvpi file association bug
  • New NOVA-HD-USB 2 driver to fix issues in Turkey and other countries with low symbol rates
  • New HVR-1975 driver to fix issues with 6875 Symbol rate
  • Fixed no Extend tab showing on upgrade installation

Download WinTV v7.2 con Extend

WinTV v7.2 con Extend è disponibile dal webstore di Hauppauge al costo di €9.95 (piu spese di spedizione). è possibile ordinarlo quì: http://www.hauppauge.com/site/webstore2/webstore_cd-wintvv7.asp

Se avete acquistato WinTV v7.2 con Extend e volete avere l'ultima versione, semplicemente scaricando ed installando l'applicazione WinTV v7 presente sotto. metterte il CD-ROM di WinTV v7.2 nel vostro lettore CD-ROM durante l'installazione l'ultima versione di Extend verrà aggiornato automaticamente.

Ultima versione di WinTV Extend

WinTV Extend è parte dell'ultima versione di WinTV v7.2 Se avete acquistato il CD di WinTV v7.2, Extend verrà installato automaticamente. se volete acquistare WinTV Extend, andate presso il nostro webstore:

WinTV Extend per iPad

WinTV Extend per iPhone

WinTV Extend router setup

Specifiche Installazione

  • Passo 1: Download il pacchetto di installazione WinTV v7
  • Passo 2: Scompattarte il pacchetto sul PC
  • Passo 3: Installare l'ultima versione di driver per Windows del prodotto Hauppauge WinTV
    (assicuratevi che il prodotto WinTV sia collegato al vostro PC o notebook)
    (durante questo passo è richiesto un riavvio del PC)
  • Passo 4: Installa WinTV v7 e le utility
  • Passo 5: Avvia WinTV v7

Step 1 - Download the WinTV v7 installer including utilities

Please click on the download link from your products support page, you will be given an option to run or save the file, click run to start the installation procedure:

Step 2 - Unpack the WinTV v7 installer on your PC

Once the file has finished downloading, the self extracting wizard will begin:

Click next then select a path where you wish to extract the files (we recommend leaving this at its default setting), the Hauppauge software and drivers will be extracted automatically to your computer.

If you have a previous version of the software installed you will be prompted to uninstall it, click OK to automatically do this.

The 'HCWClear.exe' application will start up and begin uninstalling the previous software, any error messages or notes will be shown in the black box.

Once complete you may need to restart your computer, press 'OK' to automatically restart your computer.

Step 3 - Installation of the drivers

After Windows reboots, you will see the Windows Found New Hardware Wizard. Cancel this Wizard by selecting 'Ask me again later' in Vista or select Cancel in WindowsXP.
(it may appear several times, repeat this each time the wizard is shown):

Once you are at your Windows desktop, double click on the Install WinTV 7 link to the install application:

This will open up the Hauppauge install application, click
'Step 1: Install Drivers':

This will then open up our driver installation program and automatically start installing the drivers for your product:

Once complete, click on the bar to continue.

Step 4 - Installation of the WinTV v7 application and utilities

In the Hauppauge installer you will now need to click
'Step 2: Install WinTV':

Select the language you wish to install from the list.

Note: If you wish to customize the install list click on 'Custom Installation'.

The applications relevant to your product will now be shown and will begin to install:

Note: Installing may take some time as it is updating other system components, please be patient.

Once complete click 'OK' then click 'EXIT'.

Step 5 - Run WinTV v7

Click on the WinTV v7 icon on your Windows desktop to start the application.

The first time you run WinTV v7, you will see the Device Setup Wizard to scan for TV channels. Follow the steps.

Name: irblast_28025.exe
Size: 414KB
Updated: 2/3/2010

Configuring the WinTV-HVR-1850 and WinTV-HVR-2250 built-in IR blaster for use with WinTV v7

The IR Configuration Utility is used to configure the WinTV-HVR-2250 and WinTV-HVR-1850’s built-in remote control IR blaster for use with either WinTV v7 or Windows Media Center. These instructions also show how the Hauppauge IR blaster can 'learn' your set top box remote control.

Setup of WinTV Extend - for live TV on your iPhone or iPad

Here are instructions on setting up Extend.

Setup of the TitanTV program guide (for the U.S. only)

Here are instructions on setting up TitanTV.

End user license agreement (PDF)

enduserlicenseagreement.pdf

Where can I find the manual for WinTV 7?

Click on the [?] button in the upper right hand corner of the WinTV v7 application (near the 'x' which closes WinTV).

How do I install the WinTV 7 upgrade from the Hauppauge website?

In order to upgrade your present version of WinTV you need to have a Wintv 6 or Wintv 7 installation CD to validate the upgrade. After you download the update insert the WinTV CD in the CD Rom drive ( if the CD autoruns and opens cancel the install.) then click on the WinTV 7 download to install.

How do I rescan channels?

Open WinTV 7 and click on the setting button (Gear) in the lower left of the application then click on the devices tab and highlight your Wintv device and click Tuner setup. Here you can choose from analog digital or external inputs, or all three.

How can I save my Channels database?

To save your channel database go to:

Hauppauge

C:UsersPublicWinTVChannel Database (Windows 7 and Vista)

C:Documents and SettingsAll UsersShared DocumentsWinTVChannel Database (Windows XP)

Copy the hcwChanDB_5 file to a place for safe keeping. To replace saved Channels just copy HcwChanDB_5 back to Channel Database Dir.

How can I reorder or change the channel numbers in WinTV v7?

Open the Settings menu in WinTV v7 by clicking on the “gear” button in the lower left hand corner of the WinTV v7 application. Then click on the “All Channels' tab and right click on the channel you wish to edit. Click Details. Change the Preset number to the number you want. You can also change the channel Name.

Example:
You will need to follow this procedure if you are scheduling recordings with Titan TV online program guide. For example, if you scan for TV channels in WinTV v7 and find that channel 2704 is WNBC but in the TitanTV electronic program guide WNBC is on channel 702, then do the following:

- click your right mouse button on 2704 in the All Channel list

  • change the Preset to 702
  • change the Name of the the channel to WNBC

    Then, when you select WNBC (channel 702) in TitanTV, it will tune to channel 2704, which is WNBC.

Where can I find my recorded files?

The default directory for recorded files is:

C:UsersPublicVideos

You can change the default directory by clicking on the settings icon in WinTV 7 (gear) then the capture tab. Here you will see the recoding directory you can click on browse and pick a new directory.

In Windows XP, files are recorded to:

C:Documents and SettingsAll UsersShared DocumentsMy Videos

Can I record TV shows with subtitles or closed caption?

Yes.
If the program you are watching has subtitles when you record you will also get the subtitles as part of the recording. When playing back recorded files in Wintv 7 you can use settings menu to turn the subtitles on or off. ( recorded sub titles can only be seen when using the wintv 7 application for playback.)

Can I view and record my game play from external game sources with WinTV?

Yes, as long as you can connect the game system to either S-Video or composite video on your WinTV product. If so equipped, you can view and record the game action using the WinTV application software. For close to real time video, and to eliminate the normal delay, go to Settings/Advanced options and put a check mark in Game mode. Restart the WinTV application for the change to take effect.

I am getting a black screen in WinTV v7, or I'm seeing choppy video images. What can cause this?

Signal strength. If the TV signal strength is on the edge of being too low, you might see either a black screen where the live TV picture should be, or your live TV picture might be choppy. Also, be sure that the incoming signal from your video source is working properly.

Hauppauge Wintv 7 Serial Numbers

Graphic display adapter related. The video graphics acceleration mode can cause choppy live video or possibly cause a black screen where the live TV picture should be. To optimize the video graphics mode, in the WinTV v7 application go to Settings and look under Video Renderer. EVR is the default setting. Try VMR 7, VMR 9, or overlay for better results. You may also try placing a check mark in “Use hardware acceleration when possible”.

If there is still no improvement, enabling extended logging in WinTV and emailing the log files to tech support will help in troubleshooting the problem. (To obtain extended logs, first go to Settings/Advanced options. Enable extended logging, exit WinTV and reopen it for the change to take effect).

What video format will WinTV v7 record in?

WinTV 7 will save the recordings in a transport stream format (.TS extension). These files may be converted to MPEG2 using options in the WinTV Configuration menu.

What software can I use to edit & burn the recorded files from WinTV v7?

You can use any software editor that can work with .TS files or MPEG-2 files. Here are a few examples.

Ulead DVD MovieFactory
Womble MPEG-VCR
ArcSoft Total Media Extreme
VideoReDo TVSuite

How do I scan for FM radio channels? And once I have scanned for FM radio, how do I find these radio stations in WinTV v7?

On those WinTV products with FM radio, you can scan for FM radio channels by clicking the Setup button (gear button) and then clicking on the Device tab. Choose your WinTV product, and then click Tuner setup. Click Analog FM radio and then Scan.

Once you have scanned for and found FM radio stations, you can listen to FM radio in WinTV v7. To select a channel, Right Click on the live WinTV v7 window to bring up the Option menu, and then click Find channel. Your FM radio channels can be found at the bottom of the channel list.

How can I see the WinTV v7 channel list all the time?

You can display the TV and FM radio channel list all the time by Right Clicking on the live WinTV v7 window to bring up the Options menu, and then clicking Find channel. You will see the Channel list (see picture below).

In the upper right hand corner of the Channel list is a small 'pin' icon. Click this icon to 'pin' your channel list to the WinTV v7 window.

Keyboard shortcuts

  • Ctrl A Aspect ratio
    Ctrl D Display the video and audio format of the TV program
    Ctrl F Freeze the video
    Ctrl Z Open TV Scheduler
    Ctrl O View program details (digital TV program, where provided in the broadcast)
    Ctrl S Display subtitles
    Ctrl W Full screen toggle
    Alt F Open File menu for playback
    Alt M Open the Task Menu
    Alt P Previous channel
    Ctrl Q Pause
    Ctrl P Play
    Alt R Record
    Alt S Stop
    Alt T Start TV
    Ctrl C Catch up
    Ctrl > Skip ahead
    Ctrl < Skip back

First time installation of WinTV v7 or during a reinstallation: “WinTV board not found” or “No TV tuner available”

Step 1: Check the status of your Hauppauge TV tuner drivers in Windows Device Manager
  • Click Windows Start, click on Control Panel and click on Device Manager
  • In Device Manager, click on Sound, video game Controllers
  • You should see your Hauppauge product
Step 2: If the Hauppauge device has a yellow exclamation mark

Click on the Hauppauge device to open it. If you see the following:
'Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)'
This appears to be a bug in Windows 64 bit OS since the Hauppauge Windows drivers are signed.

The following is the easiest fix to Error Code 52 on Windows 7 or Windows 8 64bit.

  • In Device Manager, right click the Hauppauge product under Sound Video and Game Controllers with the exclamation mark and select Uninstall. If you have a USB product you might see multiple listings, please right click the first one on the list. (For this example we will use the WinTV-HVR-950Q. )
  • On the Confirm window please check the box for “Delete the driver software for this device” and click OK
  • Repeat the uninstall for the other two WinTV-HVR-950Q entries. (note you won’t be asked to ‘confirm device uninstall’ again)
  • Once the drivers are removed, right click on Sound, Video, Game controllers and click Scan for Hardware Changes
  • Windows should now look online automatically for the 950Q drivers
  • Take a look after a few minutes if the drivers are installed automatically properly under Sound Video and Game Controllers.
  • If they still come back as “unsigned” try the procedure again

Errors when running WinTV 7: “TVserver cannot Start” or “.NET framework' errors

This can be caused by a corrupt WinTV v7 Channel Database. You will need to uninstall and reinstall the WinTV v7 application and the Channel database to fix this.

Hauppauge Wintv For Windows 7

To uninstall WinTV v7, click Windows Start, click on All Programs, click on Hauppauge WinTV run Uninstall Wintv7. You can also or remove Wintv7 using control panel 'add/remove programs'.

Then you need to remove the backup Channel database:

Hauppauge Wintv 7 Update

  • Windows Vista, 7 and 8: Go to C:program data ( this folder is a hidden folder so if you do not see it you need to “show hidden folders “ in your search Options) once you can get to this folder you will see a folder label “Hauppauge”. Delete this folder.
  • Windows XP: Go to C:documents and settingsall usersshared documentsapplication data ( this folder is a hidden folder so if you do not see it you need to “show hidden folders “ in your search Options) once you can get to this folder you will see a folder label “Hauppauge” delete this folder. Then download the latest version of Wintv7 located in the support section of the website and reinstall (note: you must have your original CD to validate the download.)

Settings.xml file is corrupt or missing”

Uninstall WinTV v7 using control panel Add/remove programs under Programs and Features and then reinstall WinTV 7

Hauppauge Wintv 7 Serial Number

Prodinfo.exe is a program you can run which will extract information about the WinTV product you have installed such as model and serial number, MAC address, revision, and features which can be used to identify the exact model of your product. The driver for the device must be installed in order to run Prodinfo.exe

Hauppauge Wintv 7 Serial Number

HCWCLEAR.exe is a program you run to remove all driver and files that were installed with the installation of the Wintv program.

Hauppauge Wintv Software